Material type: the outermost layer of material, which is taken from the skin part of leather. This kind of leather does not need any mechanical processing and finishing.
Advantages of the first layer Gloves: dexterous operation, comfort, grasping and accurate performance.
The inner layer of leather is obtained by cutting or removing the outer layer of leather.
Advantages of two-layer leather gloves: wear-resistant, suitable for heavy physical work.
Types of leather and its advantages
Cow's head skin: most protective gloves use cow's head skin, which is mainly scraped from the ribs. Features: soft, dexterous, comfortable, good wear resistance, tear resistance and puncture resistance.
Cow double skin: most gloves made of double skin are used for handling and heat protection. Usually, the second layer of skin on the back of cattle is used, and few shoulder parts are selected. The second layer of skin on the rib is of poor quality, so it is generally rarely used. Features: the cost is lower than cow's head leather, and the wear resistance is excellent.
Single skin: it can't pull out two layers of skin with ordinary thickness. Its advantage is that it is lighter than cow leather. Because it uses the original thickness, it is suitable for gloves with good mechanical resistance. Because the fiber is not cut, its wear resistance and puncture resistance are strengthened. If it is mixed, it will have better contact effect. Features: soft, dexterous, good wear resistance, tear resistance and puncture resistance. Its wear resistance depends on the thickness of leather. The commonly used thickness is 1.1-1.3mm (better mechanical properties) or 0.6-1.0mm (better flexibility and dexterity).
Pig's first skin and second skin: most of them are concentrated in Asian countries. Because of its poor mechanical resistance and poor dexterity after mixing, it is used as gloves with simple isolation effect. Features: low price.
Single layer leather: because of its poor wear resistance and tear resistance, it is usually only used
to make ordinary gloves. The thickness of lamb skin is directly proportional to its dexterity. The thinner it is, the more dexterous and comfortable it is to wear. Features: soft and dexterous.
Resistance of leather and main uses of leather gloves
Top leather gloves: handling or operation of small and medium-sized objects.
Oiling waterproof top leather gloves: installation of oily parts, handling of oily steel plates, carpentry, outdoor or wet work.
Two layer leather gloves: installation and handling of sharp objects, cutting work, slippery objects and welding products.
Heat resistant two-layer leather gloves: operation of heating articles, demoulding and welding.
Coated two-layer leather gloves: operation and antifouling of heavy and sharp objects.
Special treatment of glove leather waterproof leather:
It is treated with mineral oil or fluorinated resin to prevent the entry of water. This treatment can improve the mechanical properties of leather, make it more wear-resistant, increase the comfort (softness) and extended Dexterity (touch) of gloves, and prolong the service life.
Features of waterproof gloves: better dexterity, soft after use in wet places, longer service life, comfortable and accurate movement.
Oiling waterproof skin: treated with synthetic mineral oil or fluorinated resin, it can prevent the entry of water and oil. This treatment can improve the mechanical properties of leather, make it more wear-resistant, increase the comfort (softness) and extensible Dexterity (tactility) of gloves, and prolong the service life.
Features of waterproof leather gloves: better dexterity, soft after use in oily and wet places, longer service life and accurate movement.
Heat resistant leather: after treatment, the leather is more heat-resistant and reduces shrinkage in contact with fire. This treatment brings the leather into contact with the heat source for easy identification and will dye the leather yellow. This treatment can also be used for head skin.
Polyurethane coating double skin:
PU coating on the second layer of leather can prevent water and oil from entering and improve the mechanical properties of leather.
Shandong Binzhou Yong'an Labor Protection Factory
Our factory is located in the middle of jinan to Binzhou 220 national road, is China's labor protection product protection backbone enterprises, the company covers an area of 6000 square meters, is a professional production and sales of five-point safety belt, dacron safety belt, electrician safety belt, girh work belt.
- Company Name: Shandong Binzhou Yong'an Labor Protection Factory
- Representative: Zhaosuhua
- Product/Service: Safety Rope , Safety Net , Dust-proof Net , Safety Belt , Electrician Safety Belt , Dacron Safety Belt
- Capital (Million US $): 1000万元RMB
- Year Established: 2002
- Total Annual Sales Volume (Million US $): US$50 Million - US$100 Million
- Export Percentage: 41% - 50%
- Total Annual Purchase Volume (Million US $): US$10 Million - US$50 Million
- No. of Production Lines: 40
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: Jianglou Town, Huimin County, Binzhou City, Shandong Province, China
- Contact Person: Mr. zhang
- Tel: +86-0543-13455147999
Premium Related Products