Custom OEM Laser Cutting Sheet Metal Fabrication Services
Product Description
Today we are going to talk about the processing steps of stainless steel sheet metal processing, stainless steel sheet metal processing division and operation need to have clear provisions, so as to effectively operate the stainless steel sheet metal processing.
1, choose blanking, after completion, into the next process, stainless steel different workpiece according to the processing requirements into the corresponding process;
2, bending must first be according to the size of the drawing, and the thickness of the stainless steel material to determine the bending tool and knife slot, avoid product and tool collision caused by deformation is the key to the selection of the die (in the same product, may be used in different models of the die), the selection of the die according to the thickness of the plate to determine;
3, pressure riveting, to consider the height of the stud to choose the same different mold, and then adjust the pressure of the press, to ensure that the stud and workpiece surface is flat, to avoid the stud is not pressed or pressed out more than the workpiece surface, resulting in workpiece scrap. Welding argon arc welding, spot welding, carbon dioxide welding, manual arc welding, and spot welding should first consider the position of the workpiece welding, in the stainless steel sheet metal batch production to consider the positioning tool to ensure that the spot welding position is accurate.
4, in order to weld firmly, the workpiece to be welded on the convex point, can make the convex point in the electric welding before uniform contact with the plate, to ensure that the heating of each point is consistent, but also can determine the welding position;
5, stainless steel sheet metal workpiece in bending, riveting and other processes after the completion of the surface treatment, different plate surface treatment is different, cold plate processing after the general surface plating, plating is not sprayed treatment, the use of phosphating treatment, phosphating treatment to spray treatment;
6, stainless steel sheet metal on the surface of the pre-treatment, into the spraying process, in the workpiece assembly requirements after spraying, teeth or part of the conductive hole to protect the treatment, tooth holes can be checked into the soft glue rod or screw, conductive protection to be affixed with high-temperature tape;
7, after spraying into the assembly process, before assembly, remove the protective stickers used in the original spraying of stainless steel and make sure that the threaded holes in the parts are not sprinkled with paint or powder, during the whole process, wear Gloves, to avoid dust on the hand attached to the workpiece, some workpiece blown clean.
Product Description
Material Steel , Iron ,Stainless steel, Aluminum, Brass, Copper etc. Process Stamping, Deep drawing, Laser cutting,Bending, Welding, CNC etc Surface treatment Zinc plating, Nickel plating, Powder coated , Paint ,Brushed, Polishing, Anodized , Hot dip galvanizing etc . MOQ 1pcs Size Customized Size Certificate ISO9001:2015 Design 3D/CAD/Dwg/IGS/STP Package Bubble Bag+ Carton+ Wooden Box Application Metal part in all fields Service Customize ODM OEM
Material | Steel , Iron ,Stainless steel, Aluminum, Brass, Copper etc. |
Process | Stamping, Deep drawing, Laser cutting,Bending, Welding, CNC etc |
Surface treatment | Zinc plating, Nickel plating, Powder coated , Paint ,Brushed, Polishing, Anodized , Hot dip galvanizing etc . |
MOQ | 1pcs |
Size | Customized Size |
Certificate | ISO9001:2015 |
Design | 3D/CAD/Dwg/IGS/STP |
Package | Bubble Bag+ Carton+ Wooden Box |
Application | Metal part in all fields |
Service | Customize ODM OEM |
Product pictures
FAQ
1. What are your Main Products?
We specialize in manufacturing metal stamping die, metal stamping parts, sheet metal parts, CNC machining part and welding structural parts etc.
2. What is surface treatment do you have?
Powder coating, zinc plating, polished, paint, anodic oxidation etc.
3. Can I get the samples?
Yes, the sample is free, you only need to bear express shipping freight or we can send the sample to you by your collect account.
4. What is the MOQ?
The MOQ is 500pcs for large parts, 1000pcs for small parts.
5. What’s the delivery time?
Normally, it will take about 20- 25 days to finish one order.
6. What’s your payment term?
30% down payment, 70% before shipment
Contact us if you need more details on Stainless Steel Metal Stamping Parts. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Stainless Steel 304 Stamping Parts、Stainless Steel Strip Stamping Parts. If these products fail to match your need, please contact us and we would like to provide relevant information.Product Categories : Sheet Metal Fabrication > Stainless Steel Part